Are you using hydroformed products? Many of the items used by people every day are created through a process called deep draw hydroforming. Next time you are at these places or with individuals who use these items, look closely at them and see if you can see why hydroforming was the best way to create them.
Posts Tagged alternatives to metal stamping
Many business owners associate metal stamping with automotive manufacturing but this method is becoming a popular choice in other industries. Metal stamping, which uses dies and punches to form and cut cold metal, has evolved over the years as technology advanced. Not only is stamping a good way to turn out expensive and lightweight parts for the transportation industry, but it continues to be the best option for many other types of metal products, including tools and household goods.
Hydroforming is the process that involves shaping various metal parts into pieces that are sturdy and light in weight. While this is a very quick and affordable process, it is also very efficient and effective. We know that when you produce parts of any size, you will have a variety of requirements that you will need to meet. One of those requirements that you will need to be met is tight tolerance.
Hydroforming is a process that is used extensively in creating components for automobiles, airplanes, helicopters, and bicycles. However, hydroforming with brass has become a preferred method for creating shell casings and household components such as sink faucets. Why is brass considered the metal of choice for these products?
Hydroforming is the process of using pressure on sheets of metal to create shapes, many that are used in building automobiles. For example, if you look at the metal cradle holding the engine in an automobile, you are looking at something formed through tube hydroforming. If you look at the side of your automobile, it was probably formed through hydroforming used on a sheet of metal. While called by different names, there are two types of sheet hydroforming: Active and passive.
The hydroforming method has been around for more than six decades, but there have been many advancements and innovations that have changed the way each industry thinks about their profits, manufacturing strategies, design, etc. For many years now, die casting has been the preferred metal forming option for a variety of industries, including the following:
Most individuals are trying to cut costs and save money. One way is to purchase a fuel-efficient car. But most of those cars are compact cars and on the road with larger vehicles, safety can be a concern. Of most concern is getting hit and the car collapsing or trapping an individual inside the vehicle. Automobile manufacturers are always looking for ways to improve the safety of all vehicles and at the same time not make vehicles heavier.
The solid-state welding process in which the materials that are used for welding never go over the require melting points is known as friction-stir welding. This process requires heat to be generated during each point of contact that is used to join the materials together. During the friction-stir welding process, a spinning tool is imposed on a piece of work. The spinning tool is put through a downward force and turning over to the weld direction.
One of the more enjoyable aspects of living in a technological age is the ease with which we can access news and information. At any moment, we can learn about new inventions and fresh developments in any number of industries.
Just recently, an announcement of advancements in Finite Element Analysis (FEA) capabilities grabbed the attention of the hydroforming community.
Hydroforming and Midwest–both of these terms have seen their share of disinformation. Fortunately, we’re here today on a mythbusting mission, set on clearing the air and setting the record straight.